Sale

DS1307 with 8051 Development Board buy from india 8051 Project Board+Atmel USB asp ISP AVR Programmer Real Time Clock DS1307 RTC 16x2 LCD MyTechnoCare.com

RTC DS1307 with 8051 Development Board buy with Programmer,16×2 LCD Display JHD162A

Original price was: ₹1,909.00.Current price is: ₹1,133.00.

DS1307 RTC:

IIC I2C RTC DS1307 | 56 Byte NV RAM | Battery Backup | Project R&D
Leap year Compensation
Accurate Calendar up to the year 2100
Battery Backup Included
3 Volt Li(Lithium) Coin Battery
1Hz output pin
5 Volt Power Supply
Plugs into any breadboard or You can use wires
Onboard Power indication RED LED
Four mounting holes 3.0 mm for easy mounting.
Support All Digital Microcontrollers such as Arduino, 8051, PIC, AVR, ARM, MSP, COP8, STM, Raspberry Pi, etc.

8051 Board:

8051 Development Board Support AT89S51, AT89S52, P89V51RD2, etc. 40-Pin DIP Chip.
USB Programmer can be used for both 8051 & AVR IC (2in1)
AVR 8051 USB ISP Programmer Supports ATmega 8/328, 16, 32 & many others including 8051 with the same Programmer. See List of Supported IC in Description
DIP 40 Pin IC Socket For Easy Insert/Removal of Microcontroller.
On-board MAX232 Interface Circuit for Easy Communication with a PC & other RS232 serial devices (GPS modules, GSM Modems, etc)
High-quality FR-4(1.6 mm) PCB
On-Board 5 mm Power Plug-in DC Jack
On-Board 5V regulator (LM7805) circuit.
On-Board Power ON-OFF switch.
On-Board power indication RED LED.
On-Board GREEN USER LED connected to P2.0 through jumper JP3.
On-Board Input User Switch P3.3 through jumper JP2.
On-Board Input External Interrupt Switch (INT1) at P3.3 through jumper JP2.
On-board Quartz Crystal 11.05892 MHz
Port Extensions for all PORT with Detailed Pin Labeling for Easy Identification of Pin
External Pull-Up resistors for Port 0
On-board ISP connector for loading HEX file into Microcontroller like AT89S51/52 etc.
Vcc bus (5V and 12V) & GND bus provided to Give POWER Supply to the External Peripheral.
Four 3mm mounting holes for easy mounting
On-board Reset button

USB Programmer:

Allows Read/Write the Microcontroller Flash, EEPROM, Fuse Bit, and Lock Bits
Support Windows OS (Xp to 10), Mac OS X, and Linux
SCK Option to Support Targets With Low Clock Speed (<1.5 MHz).
5 KB/sec Maximum Write Speed.
The programmer can provide a 5V supply for Target Microcontroller, so No Need for Any External Supply.
Two Status LEDs | Green LED: Power Supply Indicator | RED LED: For Programmer Busy
6 pin Polarized ISP Interface for Easy Connection.

16×2 LCD Yellow/Green Back-light:

LCD display module with Yellow/Green Backlight
SIZE: 16×2 (2 Rows and 16 Characters Per Row)
Can display 2-lines X 16-characters
Operate with 5V DC
Wide viewing Angle & High Contrast
Commonly Used in fax machines, laser printers, industrial test equipment, networking equipment such as routers and storage devices, Student Project, Collage, copiers.
Support All Digital Microcontroller like Arduino,Raspberry Pi,8051,PIC,AVR,ARM,MSP430,STM etc.

42 in stock

Description

DS1307 with 8051 Development Board buy including USB Programmer, Li(Lithium) 3V Coin Battery,16×2 LCD Display, On-Board MAX232, and AT89S52 Microcontroller IC

DS1307 with 8051 Development Board Buy from India to learn How to interface RTC DS1307 with 8051 Project Kit & display real-time cloak, alarm on 16×2 LCD. Real-Time Clock RTC DS1307 interfacing with 8051 Microcontroller can be executed using I2C or IIC Serial Protocol. it also supports All Digital Microcontroller such as Arduino, 8051, PIC, AVR, PIC, ARM, MSP, COP8, STM.8051 Development Board with LCD Project Kit Support AT89S51, AT89S52, P89V51RD2, etc. 40-Pin DIP Chip.USB Programmer can be used for both 8051-AVR IC (2in1).16×2 LCD Display has Yellow Back-light.

Description of 8051 Development Board with LCD & USB Programmer Kit:

If you are learning microcontroller programming and want to make a project based on 8051 microcontrollers then this DS1307 with 8051 development board buy online with LCD and USB Programmer kit will help you. Furthermore, With this board, you can develop and prototype with any of 8051(AT89S51, AT89S52, P89V51RD2, AT89Cxx) 40 pin microcontrollers. The board has also a status LED. Because of The 1.5 Amp bridge rectifiers, you can allow this board to be powered with both AC and DC power supply adapters. Even more, Board having an RS232 Serial port for flashing the P89V51RD2 (NXP) microcontroller and also use for interfacing GSM module, GPS module, RFID module. There is also a 5V, 12V, GND power bus which allows to power external peripherals module.DS1307 with 8051 Development Board Buy at low cost from India also for DIY Hobby.

Feature of 8051 Development Board:

DIP 40 Pin Microcontroller IC Socket For Easy Insert and Removal of Microcontroller IC.
On-board MAX232 Interface Circuit for Easy Communication with a computer & other RS232 serial devices (GPS modules, GSM Modems, etc)
High-quality FR-4(1.6 mm) PCB
On-Board bridge rectifier so that the board can accept both AC and DC Input voltages Power supply
Recommended Input Voltage : 9-12V
Min-Max Input Voltage : 9-18V
On-Board 5 mm Power Plug-in DC Jack
On-Board 5V regulator (LM7805) circuit.
On-Board Power ON – OFF switch.
On-Board power indication RED LED.
On-Board GREEN USER LED connected to P2.0 through jumper JP3.
On-Board Input User Switch P3.3 through jumper JP2.
On-Board Input External Interrupt Switch (INT1) at P3.3 through jumper JP2.
On-board Quartz Crystal 11.05892 MHz
Port Extensions for all PORT with Detailed Pin Labeling for Easy Identification of Pin
External Pull-Up resistors for Port 0
On-board ISP connector for loading HEX file into Microcontroller like AT89S51/52 etc.
Vcc bus (5V and 12V) & GND bus provided to Give POWER Supply to the External Peripheral.
Four 3mm mounting holes for easy mounting
On-board Reset button.
Dimensions: 12cm x 6.4cm

Download 8051 kit document:

16×2 LCD Display Support mostly All Digital Microcontroller such as Arduino, 8051, PIC, AVR, ARM, MSP, COP8, STM, Raspberry Pi, etc.

About 16×2 LCD Display:

First of all 16×2 LCD is a basic 16 character by 2 line display Yellow/Green Backlight. Utilizes the extremely most common HD44780 parallel interface chipset (datasheet). Even more, it has JHD162A Compatible Pin-out Diagram, so the Command Interface code is freely available. Finally, You will need 7 general I/O pins (If used in 4-bit Mode) to interface to this LCD screen. it also includes an LED backlight. Learn How To Interface 8051 Development Board with LCD 16×2 Display using 8051/AVR USB Programmer for Burn/Flash Hex File into Atmel AT89S52 Microcontroller. The hobbyist can learn the interfacing of DS1307 with 8051 Development Board Buy along with 16×2 LCD.

Features of 16×2 Display LCD:

Commonly Used in Student Project, College, copiers, fax machines, laser printers, industrial test equipment, networking equipment such as routers and storage devices
LCD display module with Green/Yellow Backlight
SIZE: 16×2 (2 Rows and 16 Characters per Row)
Can display 2-lines X 16-characters
Operate with 5V DC
Wide viewing angle and high contrast
Built-in industry standard HD44780 equivalent LCD controller
LCM type: Characters

About of DS1307 RTC Module:

This is the DS1307 Real Time Clock (RTC) Module, this small breakout board that uses the most popular DS1307 to keep track of the current year, month, day as well as current time. The module comes fully assembled and includes a small Lithium coin cell battery that will run the RTC for a minimum of 9 years without an external 5V Power supply. The DS1307 RTC is accessed via I2C Protocol. Finally DS1307 with 8051 Development Board Buy online is the easiest way for Electronics engineers to collect necessary components in a time-efficient way.

Features of Real Time Clock DS1307 Board:

Two-wire I2C interface
(hh : mm : ss) Hour : Minutes : Seconds AM/PM
(DD/MM/YYYY) Day Month, Date – Year
Leap year Compensation
Accurate Calendar up to the year 2100
Battery Backup Included
3 Volt Li (Lithium) Coin Battery
1Hz output pin
5 Volt Power Supply
56 Bytes of Non-volatile Memory Available to User
Plugs into any breadboard or You can use wires
Onboard power indication RED LED
Four Mounting Holes 3.0 mm for Easy Mounting.
Dimensions: 43 mm x 34.5 mm

Document of DS1307 Kit:

AVR 8051 USB ISP Programmer Support many Digital Microcontrollers like (89S51, 89S52, AT89SXX, Classic AT90SXX, CAN Series) & (AVR, ATmega, ATtiny), etc.

About AVR 8051 USB ISP Programmer:

USB AVR and AT89Sxx ISP (In System programming) Programmer is a low-cost USB-based programmer. Because it is ISP, so there is no need to take out the target microcontroller from the development Board. This programmer will work with a wide variety of Atmel AVR and also AT89Sxxxx microcontroller. This is quite compact, but the design is really elegant. Even more, The USB interface is achieved by using an atmega8 processor, and the rest is done in firmware.USB Programmer is used to loading Hex file, for example, suppose interfacing code Hex file of DS1307 with 8051 Development Board Buy with 16×2 Lcd and ISP Programmer.

Features of Atmel AVR 8051 ISP Microcontroller Programmer:

Allows You to Read or Write the Microcontroller Flash, EEPROM, Fuse Bit, and Lock Bits.
Support Windows OS (Xp to 10), Mac OS X, and Linux.
ATmega8 with USBasp Firmware Pre-loaded.
Support ATmega 8/328, 16, 32, and many others including 8051 with the same Programmer.
SCK Option to Support Targets With Low Clock Speed (<1.5 MHz).
5 KB/sec Maximum Write Speed.
The programmer can Provide a 5V supply for Target Microcontroller, so No Need for Any External Supply.
Two Status LEDs | Green LED: Power Supply Indicator | RED LED: This is ON While Programmer is Busy
6 pin Polarized ISP Interface for Easy Connection.

Supported Software Download For 8051 & AVR USB Programmer:

Progisp – Windows GUI application for AVR and AT89Sxx. (2)
AVRdude – Version 5.2 or later. AVRdude is available for many platforms. (1)
Khazama AVR Programmer – All Windows OS (Xp to 10) GUI applications for USBasp & avrdude. (1)

Note:

Khazama AVR Programmer and AVRdude do not support AT89SXX.
Progisp support almost both AVR and AT89SXX controller.

Download Link:

(All in 1 RAR file) For How to install driver | Circuit Diagram | Connection | Program 8051 AVR Microcontroller | Driver For All Windows OS 64-bit & 32-bit

Download (All in 1 RAR File)

Supported Microcontroller List:

ATMEL ATmega Series:

ATmega8 ATmega8A ATmega48 ATmega48A ATmega48P ATmega48PA
ATmega88 ATmega88A ATmega88P ATmega88PA ATmega168 ATmega168A
ATmega168P ATmega168PA ATmega328 ATmega328P ATmega103 ATmega128
ATmega128P ATmega1280 ATmega1281 ATmega16 ATmega16A ATmega161
ATmega162 ATmega163 ATmega164 ATmega164A ATmega164P ATmega164PA
ATmega169 ATmega169A ATmega169P ATmega169PA ATmega2560 ATmega2561
ATmega32 ATmega32A ATmega324 ATmega324A ATmega324P ATmega324PA
ATmega329 ATmega329A ATmega329P ATmega329PA ATmega3290 ATmega3290A
ATmega3290P ATmega64 ATmega64A ATmega640 ATmega644 ATmega644A
ATmega644P ATmega644PA ATmega649 ATmega649A ATmega649P ATmega6490
ATmega6490A ATmega6490P ATmega8515 ATmega8535

Tiny Series:

ATtiny12 ATtiny13 ATtiny13A ATtiny15 ATtiny25 ATtiny26 ATtiny45 ATtiny85
ATtiny2313 ATtiny2313A

Classic Series:

AT90S1200 AT90S2313 AT90S2333 AT90S2343 AT90S4414 AT90S4433 AT90S4434 AT90S8515 AT90S8535

CAN Series:

AT90CAN128

PWM Series:

AT90PWM2 AT90PWM3

AT89Sxx Series:

AT89S51 AT89S52 AT89S53 AT89S8252 AT89S8253

Package Contents:

1 x USB ISP Programmer
1 x 6-pin Polarized Cable
1 x USB A to B Cable
1 x 8051 Development Board
1 x AT89S52 On-Board Microcontroller IC
1 x MAX232 On-Board RS232 driver IC
1 x LCD 16×2 with Yellow/Green Backlight
1 x RTC Module with DS1307
1 x Li (Lithium) Coin Battery 3 Volt

NOTE:

POWER SUPPLY Adapter IS NOT Included WITH THIS ITEM(DS1307 with 8051 Development Board buy online with USB Programmer Kit).

Have any queries, Please Contact Us

More Related Items

Additional information

Brand	MY TechnoCare
Condition	New: A brand-new, unused and undamaged item.
Type	Development Board+RTC +LCD+USB Programmer KIT
Supported IC	40Pin 8051 IC(Board), 8051&AVR(Programmer), DS1307
Bundled Items	8051 Board,Programmer,6Pin Cable,USB Cable,LCD,RTC
MPN	MY010V2.1 & MY011V2.1 & MY012V2.0 & 162A
Power Supply	9to12 Volt AC/DC (Board), 5V DC(Programmer,LCD,RTC)
Image Aspect Ratio	5×7 Pixel Per Character (For 16×2 LCD)
Resolution	16×2 (2 Rows and 16 Characters Per Row) (For LCD)
Memory	For AT89S52 (8K bytes of Flash, 256 bytes RAM)
Processor Speed	For 89S52 (Up to 33 MHz) (On Board 11.0592MHz)
Processor Socket	40-Pin DIP IC Socket (OnBoard)
Input/Output	4xGeneral Purpose IO PORT,1 x Serial RS232 DB9 Port
Extra User Interrupt	1 x On Board External Interrupt Switch (INT1)
Communication Port	1 x Serial DB9 Connector (BOARD), USB(Programmer)
Functionality	Industrial or Project Development & Programming
Connectivity	Serial RS232 (Board ), USB (Programmer)
Brightness	Adjustable Resistor Controlled (For 16×2 LCD)
Utility	Research & Development, Education, Technical DIY
PCB Quality	FR4 Glass epoxy, High Quality
Weight	<200 Gram
Installation	Four Mounting hole 3.0 mm for Easy Mounting(Board)
Display Type	LED Indicator(Board) & LCD
Extra User Peripheral(OnBoard)	1 x User LED Green (P2.0 Pin), 1xUser Switch P3.3
UPC	Does Not Apply

Reviews

There are no reviews yet.

Be the first to review “RTC DS1307 with 8051 Development Board buy with Programmer,16×2 LCD Display JHD162A”

This site uses Akismet to reduce spam. Learn how your comment data is processed.